Assembly and installation, LED Mirror Light for the Bathroom

LED Mirror Light in metal and acrylic. Integrated LED, 110 to 240 V, IP44, wall-mounted, lengths 40 to 100 cm.

Safety, read this first

  • Switch off the circuit at the consumer unit before touching any wiring, and make sure nobody can switch it back on while you work. Never work on the lamp while the power is on.
  • This lamp is wired directly into the wall. This work must be carried out by a qualified electrician, not as a DIY job. Please have it installed by one.
  • Check the lamp for transport damage before installation. If anything is damaged or missing, do not install it; contact us.
  • Rated IP44 against splashing water, so it can be installed above a bathroom mirror. Never aim water directly at the lamp.

Part 1 · Prepare the lamp, power off

1
Unscrew the mounting plate from the back of the lamp body and keep the screws.

Part 2 · Mount the lamp on the wall, by a qualified electrician

2
Drill the holes, insert the wall plugs and screw the mounting plate to the wall, with the supply cable coming out through the opening in the plate.
3
Connect the supply wires to the lamp's power lead, brown to live (L) and blue to neutral (N), one at a time, and wrap each connection with insulating tape.
4
Fit the lamp body onto the mounting plate with the connected wires inside, then tighten the screw on the underside. The installation is complete.

Using the lamp

5
Switch on the lamp using your wall switch. If it does not light up, switch it off at the consumer unit and contact us.
6
Version with 3 colour temperatures: To change the light colour, switch the lamp off and on again using your wall switch. Each time, it switches to the next colour in this order: warm white, cool white, neutral white.
7
Fold out the arm and tilt the light bar to the desired angle.

Specifications

Type mirror light, bathroom wall lamp
Material metal and acrylic
Colour black or white
Light source integrated LED, included
Light colour daylight white, or 3 colour temperatures changed with the wall switch
Voltage 110 to 240 V
Protection class IP44
Lengths 40, 50, 60, 80 and 100 cm
Arm and height arm 25.4 cm, height 5 cm
Certification CE

Need help? Write to info@chandlix.com and quote your order number.

These instructions describe the lamp only. The electrical installation must follow the rules in force in your country and must be carried out by a qualified electrician. Chandlix accepts no responsibility for damage or injury caused by incorrect installation, installation carried out by an unqualified person, or use outside the specifications above.