Disc Pendant Lamp in metal, Macaron colours. E27, maximum 40 W, 3000K warm white, indoor and dry locations only.
Safety, read this first
- Switch off the circuit at the consumer unit before you touch any wiring, and make sure nobody can switch it back on while you work. Never work on the lamp with the power on.
- This lamp is wired directly into the ceiling. In Sweden and Germany that is work for a qualified electrician, not a do it yourself job. Please have it installed by one.
- Check the lamp for transport damage before you install it. If anything is damaged or missing, do not install it, contact us.
- Do not exceed 40 W. Let the bulb cool before you touch it.
Part 1 · Prepare the lamp, power off
1
Fit the lamp head to the metal mounting plate and tighten the nut and washer.
2
Place the disc shade on the lamp head and secure it with the locking ring.
3
Screw in an E27 bulb, maximum 40 W, and test the lamp before mounting it. If it does not light up, stop and contact us. We will send a replacement light source or lamp head.
Part 2 · Mount the lamp, by a qualified electrician
Choose the method that matches your ceiling.
A. Surface mounting, the lamp sits against the ceiling on a bracket
4
Screw the mounting bracket to the ceiling.
5
Connect live and neutral from the ceiling supply to the matching terminals on the lamp plate, one at a time, and wrap each connection with insulating tape.
6
Fix the lamp to the bracket using the side screws.
B. Concealed mounting, the ceiling has a recessed opening
4
Connect live and neutral from the ceiling supply to the matching terminals on the lamp plate, one at a time, and wrap each connection with insulating tape.
5
Release the spring latches on the plate and push them into the prepared opening, 5 to 9 mm.
Specifications
| Diameter | 35 cm |
| Height | 21 cm |
| Adjustable drop | up to 150 cm |
| Socket and maximum power | E27, 40 W |
| Colour temperature | 3000K warm white |
| Material | iron, aluminium and steel |
| Weight | approx. 1 kg |
Need help? Write to info@chandlix.com and quote your order number.
These instructions describe the lamp only. The electrical installation must follow the rules in force in your country and must be carried out by a qualified electrician. Chandlix accepts no responsibility for damage or injury caused by incorrect installation, by installation carried out by a person who is not qualified, or by use outside the specifications above.